Male BSPT Stud JIC Fittings Introduction
This male stud connector is from JIC 37 degree flared tube end to BSPT stud ends, meet standards of ISO 7/BS 21/DIN 2999-1/JIS B 0203 pressure tight pipe thread joint, BSPT taper thread sealing by plastic thread sealing material, it will be matched with port tapping taper and parallel thread stands of ISO 7/1-Rp/Rc DIN 2999-Rc BS 21-Rp/Rc Japan PT. It is mainly used in Great British and Asia-Pacific areas.
Overview Catalogue Of Male BSPT Stud JIC Fittings Connectors
Male BSPT stud JIC fitting is made of these shapes(Parker-Eaton series no), from hex bar or forging body as follows:
F3MX/1JT
| V3MX/1JT4
| C3MX /1JT9
|
F63MX/2TJ
| R3MX / AJJT
| S3MX/AJTJ
|
Dimensions Of JIC Male BSPT Stud Fittings
Male stud BSPT/PT Sealing Tapered thread ISO 7/BS 21 and DIN 2999-1
T2 | T4 | T5 | B1 min. | B2 min. | B3 min. |
R 1/8 | Rp 1/8 | Rc 1/8 | 9.7 | 7.9 | 7.4 |
R 1/4 | Rp 1/4 | Rc 1/4 | 12 | 11.2 | 11 |
R 3/8 | Rp 3/8 | Rc 3/8 | 13.5 | 12 | 11.4 |
R 1/2 | Rp 1/2 | Rc 1/2 | 17.6 | 15 | 15 |
R 3/4 | Rp 3/4 | Rc 3/4 | 19.1 | 16 | 16.3 |
R 1 | Rp 1 | Rc 1 | 21.4 | 19.1 | 19 |
R 1 1/4 | Rp 1 1/4 | Rc 1 1/4 | 21.4 | 19.9 | 21.4 |
R 1 1/2 | Rp 1 1/2 | Rc 1 1/2 | 22.4 | 20.6 | 21.4 |
Port BSPP (parallel): ISO 7/1-Rp; BS 21-Rp (ISO 1179-1)
Port BSPT (taper): ISO 7/1-Rc/BS 21-Rc; DIN 2999-Rc (Japan: PT)
Dimensions of ISO 7 - Pipe Threads where Pressure-tight Joints are made on the Threads
Pipe Size | Threads per Inch | Major Diameter | Pitch | Major Diameter | Minor Diameter |
(inches) | TPI - Pitch | OD (inches) | (mm) | (mm) | (mm) |
1/16" | 28 | 0.304 | 0.907 | 7.723 | 6.561 |
1/8" | 28 | 0.383 | 0.907 | 9.728 | 8.566 |
1/4" | 19 | 0.518 | 1.337 | 13.157 | 11.445 |
3/8" | 19 | 0.656 | 1.337 | 16.662 | 14.95 |
1/2" | 14 | 0.825 | 1.814 | 20.955 | 18.631 |
5/8" | 14 | 0.902 | 1.814 | 22.911 | 20.587 |
3/4" | 14 | 1.041 | 1.814 | 26.441 | 24.117 |
7/8" | 14 | 1.189 | 1.814 | 30.201 | 27.877 |
1" | 11 | 1.309 | 2.309 | 33.249 | 30.291 |
1-1/8" | 11 | 1.49 | 2.309 | 37.897 | 34.939 |
1-1/4" | 11 | 1.65 | 2.309 | 41.91 | 38.952 |
1-1/2" | 11 | 1.882 | 2.309 | 47.803 | 44.845 |
1-3/4" | 11 | 2.116 | 2.309 | 53.746 | 50.788 |
2" | 11 | 2.347 | 2.309 | 59.614 | 56.656 |
2-1/4" | 11 | 2.587 | 2.309 | 65.71 | 62.752 |
2-1/2" | 11 | 2.96 | 2.309 | 75.189 | 72.226 |
3" | 11 | 3.46 | 2.309 | 87.844 | 84.926 |
1 inch (in) = 25.4 millimeter (mm) 1 millimeter (mm) = 0.03937 inch (in)
Reference standards for BS 21 tapered pipe threads are: ISO 7/1, DIN 2999 - Germany and JIS B 0203 - Japan.
BSPT MALE STUD JIC FITTING CATALOG
Male BSPT Stud JIC Fittings Introduction
This male stud connector is from JIC 37 degree flared tube end to BSPT stud ends, meet standards of ISO 7/BS 21/DIN 2999-1/JIS B 0203 pressure tight pipe thread joint, BSPT taper thread sealing by plastic thread sealing material, it will be matched with port tapping taper and parallel thread stands of ISO 7/1-Rp/Rc DIN 2999-Rc BS 21-Rp/Rc Japan PT. It is mainly used in Great British and Asia-Pacific areas.
Overview Catalogue Of Male BSPT Stud JIC Fittings Connectors
Male BSPT stud JIC fitting is made of these shapes(Parker-Eaton series no), from hex bar or forging body as follows:
F3MX/1JT
| V3MX/1JT4
| C3MX /1JT9
|
F63MX/2TJ
| R3MX / AJJT
| S3MX/AJTJ
|
Dimensions Of JIC Male BSPT Stud Fittings
Male stud BSPT/PT Sealing Tapered thread ISO 7/BS 21 and DIN 2999-1
T2 | T4 | T5 | B1 min. | B2 min. | B3 min. |
R 1/8 | Rp 1/8 | Rc 1/8 | 9.7 | 7.9 | 7.4 |
R 1/4 | Rp 1/4 | Rc 1/4 | 12 | 11.2 | 11 |
R 3/8 | Rp 3/8 | Rc 3/8 | 13.5 | 12 | 11.4 |
R 1/2 | Rp 1/2 | Rc 1/2 | 17.6 | 15 | 15 |
R 3/4 | Rp 3/4 | Rc 3/4 | 19.1 | 16 | 16.3 |
R 1 | Rp 1 | Rc 1 | 21.4 | 19.1 | 19 |
R 1 1/4 | Rp 1 1/4 | Rc 1 1/4 | 21.4 | 19.9 | 21.4 |
R 1 1/2 | Rp 1 1/2 | Rc 1 1/2 | 22.4 | 20.6 | 21.4 |
Port BSPP (parallel): ISO 7/1-Rp; BS 21-Rp (ISO 1179-1)
Port BSPT (taper): ISO 7/1-Rc/BS 21-Rc; DIN 2999-Rc (Japan: PT)
Dimensions of ISO 7 - Pipe Threads where Pressure-tight Joints are made on the Threads
Pipe Size | Threads per Inch | Major Diameter | Pitch | Major Diameter | Minor Diameter |
(inches) | TPI - Pitch | OD (inches) | (mm) | (mm) | (mm) |
1/16" | 28 | 0.304 | 0.907 | 7.723 | 6.561 |
1/8" | 28 | 0.383 | 0.907 | 9.728 | 8.566 |
1/4" | 19 | 0.518 | 1.337 | 13.157 | 11.445 |
3/8" | 19 | 0.656 | 1.337 | 16.662 | 14.95 |
1/2" | 14 | 0.825 | 1.814 | 20.955 | 18.631 |
5/8" | 14 | 0.902 | 1.814 | 22.911 | 20.587 |
3/4" | 14 | 1.041 | 1.814 | 26.441 | 24.117 |
7/8" | 14 | 1.189 | 1.814 | 30.201 | 27.877 |
1" | 11 | 1.309 | 2.309 | 33.249 | 30.291 |
1-1/8" | 11 | 1.49 | 2.309 | 37.897 | 34.939 |
1-1/4" | 11 | 1.65 | 2.309 | 41.91 | 38.952 |
1-1/2" | 11 | 1.882 | 2.309 | 47.803 | 44.845 |
1-3/4" | 11 | 2.116 | 2.309 | 53.746 | 50.788 |
2" | 11 | 2.347 | 2.309 | 59.614 | 56.656 |
2-1/4" | 11 | 2.587 | 2.309 | 65.71 | 62.752 |
2-1/2" | 11 | 2.96 | 2.309 | 75.189 | 72.226 |
3" | 11 | 3.46 | 2.309 | 87.844 | 84.926 |
1 inch (in) = 25.4 millimeter (mm) 1 millimeter (mm) = 0.03937 inch (in)
Reference standards for BS 21 tapered pipe threads are: ISO 7/1, DIN 2999 - Germany and JIS B 0203 - Japan.
BSPT MALE STUD JIC FITTING CATALOG
