Introduction Of JIC Tube Nut and Sleeves
JIC Tube nuts is used for sleeve clamping the flare tube between the body nose(seat) producing a free-leak tight metal to metal face seal connection, connecting the 37 degree flare fittings. It has different symbols of nuts ISO “N”, Parker “BTX/BMTX”, Winner“NB200” , sleeve symbol is ISO “SL”, Parker“TX”, Winner“NB500/NB300” etc. JIC nut and sleeves meet the strict requirement of SAE J514 and ISO 8434-2 Industry standards.
Assembly Of JIC Tube Nut and Sleeves
The fitting consists of three pieces: the body, sleeve and nut. The tube is flared at a 37°angle (74°included angle) and held between the fitting nose (seat) and the sleeve (support) with the nut as shown in Figure, providing a very effective seal between the fitting nose and the tube flare.
Standards Of JIC Tube Nuts and Sleeves
JIC Tube Nuts meet standard of SAE J514 070110 MS51531and ISO 8434-2 N.
JIC Tube Sleeves meet standard of SAE J514 070115 MS51533 070M15 and ISO 8434-2 SL.
Finish is 72 hours without surface coating corrosion acc.to ISO 9227 Fe/Zn8/Cn/T0(T2).
Raw Material types of JIC Tube Nuts and Sleeves
They are made of carbon steel SAE 1010 to 1215, stainless steel AISI 304 or 316L and cooper C36000(CA360) bar stock or C37700(CA377) forging, types of material is cold formed, hot formed or machined from cold drawn bar, it is based on different size for right material shapes.
Dimensions of JIC tube nuts from ISO 8434-2/SAE J514 070110 MS51531
Dimensions of JIC tube sleeves from ISO 8434-2/SAE J514 Inch Sleeve SAE 070115 and Metric Sleeve SAE 0701M15
Introduction Of JIC Tube Nut and Sleeves
JIC Tube nuts is used for sleeve clamping the flare tube between the body nose(seat) producing a free-leak tight metal to metal face seal connection, connecting the 37 degree flare fittings. It has different symbols of nuts ISO “N”, Parker “BTX/BMTX”, Winner“NB200” , sleeve symbol is ISO “SL”, Parker“TX”, Winner“NB500/NB300” etc. JIC nut and sleeves meet the strict requirement of SAE J514 and ISO 8434-2 Industry standards.
Assembly Of JIC Tube Nut and Sleeves
The fitting consists of three pieces: the body, sleeve and nut. The tube is flared at a 37°angle (74°included angle) and held between the fitting nose (seat) and the sleeve (support) with the nut as shown in Figure, providing a very effective seal between the fitting nose and the tube flare.
Standards Of JIC Tube Nuts and Sleeves
JIC Tube Nuts meet standard of SAE J514 070110 MS51531and ISO 8434-2 N.
JIC Tube Sleeves meet standard of SAE J514 070115 MS51533 070M15 and ISO 8434-2 SL.
Finish is 72 hours without surface coating corrosion acc.to ISO 9227 Fe/Zn8/Cn/T0(T2).
Raw Material types of JIC Tube Nuts and Sleeves
They are made of carbon steel SAE 1010 to 1215, stainless steel AISI 304 or 316L and cooper C36000(CA360) bar stock or C37700(CA377) forging, types of material is cold formed, hot formed or machined from cold drawn bar, it is based on different size for right material shapes.
Dimensions of JIC tube nuts from ISO 8434-2/SAE J514 070110 MS51531
Dimensions of JIC tube sleeves from ISO 8434-2/SAE J514 Inch Sleeve SAE 070115 and Metric Sleeve SAE 0701M15
